Project: Bell Street, Maidenhead
(Click images for larger view)
Architect: LHA Architects
Product: 110HC & 300 Aerofoil fin (Contra Fin)
300 Aerofoils vertically stacked over 10 metres to the stairwell curtain wall system on three elevations. 110HC system to top floor roof terrace span the entire length returning round one corner.
The 300 Aerofoils are secured to Bird Beak brackets that are fitted to a Contrasol designed Curtain wall fixation assembly. The 110HC System is secured to the building faade by standard brackets and arms.
Project: Heston School, London
(Click images for larger view)
Architect: Ellis Williams
Product: 300F Aerofoil and 100C Modular Blade System
Info coming soon
Info coming soon
Project: Project Pinnacle, Crawley, West Sussex
(Click images for larger view)
Architect: DPDS Architecture
Product: 110HC System
A Refurbishment project that utilized horizontal Brise Soleil on a south facing elevation to help reduce solar gain and glare to the building with the added benefit of updating the existing building façade.
The Inframe louver system was fixed continuously across the building facade over four floors with returns around to the east elevation.
Project: Sutton Park Road, Surrey
(Click images for larger view)
Architect: DMWR Architects
Product: 110HC System
The penthouse floor of these apartments has been finished with a standard louvre system that provides solar control and an attractive architectural feature.
The 110HC system is a horizontally projecting in- frame louver design which is secured to the building by spiggot brackets projecting from the building facade.
Project: Bracknell Open Learning Centre
(Click images for larger view)
Architect: De Novo Architecture
Product: 100C Sunscreen system (Under-slung & Over-slung types)
The two areas of this open learning centre has benefited from this cost effective solar shading system. The first area is to feature blockwork above windows at ground floor, the second area is to south facing curtain wall over ground and first floor levels.
The first area shows our under slung system fixed to the building face by bespoke brackets and supporting tie rods. The second area to curtain wall uses a combination of under-slung and over-slung systems that mirror each other, again showing supporting tie rods back to curtain wall mullions.
Project: New Office building, Telford
(Click images for larger view)
Architect: RRP Architekten ZT - GmbH
Product: 110HC Sunscreen System
A new office development has a continuous run of our standard Sunscreen system to three elevations of the build, providing solar shading to the first floor windows.
The system was installed in two stages with Contrasol standard first fix brackets going back to a suitable structure before render, then the simple slide and clip 110HC system installed and finished in a short second fix.
Project: Cromer visitors centre, Cromer
(Click images for larger view)
Architect: Stead Mutton Associates
Product: 110HC & 100R Sunscreen System
Two areas of the visitors centre have benefited from our sunscreen systems, the entrance with the 110HC system providing solar shading and our 100R system to the rotunda as solar shading and a stand out feature.
The 110HC System is fitted to first fix brackets and projecting arms from the building, the 100R Louvre blades are secured between standard arms in-between steels.